ABR® Marble Polish

Description

ABR® Marble Polish is a rubbing, polishing compound for the restoration of polished marble, granite, slate, travertine, mosaics, onyx and sandstone. ABR® Marble Polish may also be used to restore gloss and luster to any polished masonry surface. ABR® Marble Polish’s water-soluble abrasive diminishes in size as the polish is rubbed into the surface being restored. This property of the abrasive lessens the possibility of swirl marks on the surface.

Product Specifications

MATERIAL SAFETY DATA SHEET

Additional information

SURFACE PREPARATION:	A test area should be performed in and inconspicuous area to beginning overall project to determine precise procedure necessary for the most effective application. User shall determine the suitability of the product for intended its use and assumes all risk and liability whatsoever in connection therewith. Read product label and MSD sheet before using ABR® Marble Polish. ABR® Marble Polish should not be diluted or thinned. Use as is.
APPLICATION:	1. Clean surface free of dirt, oil or other foreign materials. 2. Apply ABR® Marble Polish to wet surface using a dampened buffing pad on an electric buffer at 1500 to 1700 RPM in a circular motion. 3. As the surface is buffed and the polishing particles diminish in size, adding product to the buffing pad may be required. 4. Continue buffing until desired results are achieved. Remove any excess ABR® Marble Polish with a sponge and water. NOTE: Do not attempt to do this process by hand. Proper results will not be obtained.

SURFACE PREPARATION:

A test area should be performed in and inconspicuous area to beginning overall project to determine precise procedure
necessary for the most effective application. User shall determine the suitability of the product for intended its use and assumes all risk and liability whatsoever in connection therewith. Read product label and MSD sheet before using ABR® Marble Polish. ABR® Marble Polish should not be diluted or thinned. Use as is.

APPLICATION:

1. Clean surface free of dirt, oil or other foreign materials.
2. Apply ABR® Marble Polish to wet surface using a dampened buffing pad on an electric buffer at 1500 to 1700 RPM in a circular motion.
3. As the surface is buffed and the polishing particles diminish in size, adding product to the buffing pad may be required.
4. Continue buffing until desired results are achieved. Remove any excess ABR® Marble Polish with a sponge and water.
NOTE: Do not attempt to do this process by hand.
Proper results will not be obtained.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Description

Additional information

Reviews

ABR® Stone & Marble Guard

Copper & Brass Prewash and Brightener

600 Pre-Thickened Efflorescence & Lime Dissolver

PolyShield® Mall Mask

Title

ABR® Marble Polish